Construction figure

Surface marking

Identification

Construction table

• ※Core number mark “+1C” has the [Y/G] ground core of 14AWG size.
• ※3 or 4 and 14AWG size has the [Y/G] ground core of an equal size.
• ※The test of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is applied.

Allowable ampacity

• The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30°C.
• Allowable ampacity is calculated based on JCS0168.
  Allowable ampacity is calculated excluding grounding conductor.
• Please multiply the following adjustment factors by the ambient temperature.

●Adjustment factors (at ambient temperature)

Movement characteristic

• ＊）1 It is C when overall diameter of the cable is 20mm or more, and D when overall diameter of the cable is 30mm or more.
• ＊）2 When overall diameter of the cable is 20mm or less.
• ※The longevity of the cable inside a cable bearing is dependent on the travel distance.
  Please consult our Sales Department when wiring a travel distance of 5m or greater.

Oil resistance

※A～C in the table indicate the characteristics below.

• A：There is no problem on practical use at all.
• B：Deterioration slightly no problem almost on practical use.
• C：It is sometimes deteriorated to some degree, and not possible to use it.

Standard sales length

100m
(Sales by short length is available for large sizes. Please contact us which sizes are available.)